SINGLE-USE SYRINGE

Single-use syringes are disposable sterile medical devices designed for general injection and fluid administration. Intended for one-time use, they help maintain hygiene and reduce the risk of contamination in clinical environments.

Engineered for consistent performance, these syringes support safe and controlled medical procedures.

Product features:

  • Non-toxic, non-pyrogenic
  • Latex free
  • EO gas sterilization
  • Highly transparent barrel for easy recognition
  • Available in a wide range of sizes, from 1 mL to 60 mL
  • Luer slip and luer lock syringes are available
  • Syringes with and without needles are available
  • Made in Korea

Compare the sizes

Sungshim produces this syringe from 1 mL to 60 mL. Pick a capacity to see it drawn against the 3 mL for scale, along with the needles and packing offered for that size.

↔ Swipe the diagram to see the full syringe

Capacity
Tip type
Needle options
    Typical use

    Luer lock threads onto the syringe and will not separate under pressure; luer slip pushes on by friction. Specifications as published by Sungshim Medical.

    Disposable Syringe Product Types

    Capacity Tip Type Needle Size Inner Box Carton Box
    1 mL/cc Luer Slip 23G x 25 mm (1") 100 pcs 3,600 pcs
    26G x 13 mm (1/2")
    27G x 13 mm (1/2")
    27G x 25 mm (1")
    30G x 13 mm (1/2")
    Without needle
    2 mL/cc Luer Slip, Luer Lock 23G x 25 mm (1") 100 pcs 2,400 pcs
    3 mL/cc Luer Slip, Luer Lock 23G x 25 mm (1") 100 pcs 2,400 pcs
    24G x 19 mm (3/4")
    Without needle
    5 mL/cc Luer Slip, Luer Lock 23G x 25 mm (1") 100 pcs 1,800 pcs
    22G x 32 mm (1 1/4")
    21G x 32 mm (1 1/4")
    Without needle
    10 mL/cc Luer Slip, Luer Lock 23G x 25 mm (1") 100 pcs 1,200 pcs
    22G x 32 mm (1 1/4")
    21G x 32 mm (1 1/4")
    Without needle
    20 mL/cc Luer Slip, Luer Lock 23G x 25 mm (1") 50 pcs 800 pcs
    22G x 32 mm (1 1/4")
    21G x 32 mm (1 1/4")
    18G x 38 mm (1 1/2")
    Without needle
    30 mL/cc Luer Slip, Luer Lock 21G x 32 mm (1 1/4") 50 pcs 600 pcs
    18G x 38 mm (1 1/2")
    Without needle
    50 mL/cc Luer Slip, Luer Lock 21G x 32 mm (1 1/4") 25 pcs 400 pcs
    18G x 38 mm (1 1/2")
    60 mL/cc Irrigation syringe Without needle (Catheter tip) 25 pcs 400 pcs

    For other sizes, please contact us.

    Instructions for Use

    1. Preparation
      • Inspect the packaging for any damage, missing parts, or expired products before use.
      • Ensure the user fully understands the purpose, instructions, and safety precautions prior to use.
    2. Usage Procedure
      • Wash hands thoroughly before handling the syringe and open the packaging.
      • Remove the protective cap and carefully pull off the needle cap without damaging the needle.
      • Clean the injection site using an alcohol swab and allow it to dry completely.
      • Draw or prepare the required medication dose as directed by the healthcare professional.
      • Remove any air bubbles by gently tapping the syringe and adjusting the plunger.
      • Pinch the skin lightly when required and administer the injection.
      • After injection, remove the needle and gently press the site with a swab; do not rub.

    Disposal and Storage After Use

    • This product is intended for single use only, do not reuse.
    • Dispose of used syringes in a sealed, puncture-resistant container and follow proper disposal regulations.

    Safety Information

    Warnings

    • Using the wrong syringe size or applying the product incorrectly may lead to dosing errors or injury.
    • Users must fully understand proper usage and precautions before use.

    Precautions

    • Use only for its intended purpose.
    • Do not use if packaging is damaged or contaminated.
    • Do not use if the needle is bent or damaged.
    • Open immediately before use; do not pre-fill for extended storage.
    • Injection discomfort may increase if:
    • The needle coating is damaged, for example after wiping with alcohol.
    • The needle direction is altered during insertion or withdrawal.
    • Air bubbles are not removed prior to injection.
    • This is a single-use sterile product; reuse is strictly prohibited.

    Intended Use

    This product is designed for single-use medication administration and general clinical injection procedures.

    Product Specifications

    • Shelf Life: 5 years from the date of manufacture
    • Packaging: Individual sterile packaging by listed size and tip-type variant
    • Storage Conditions: Store at room temperature; avoid exposure to direct sunlight, heat, and humidity

    Note: This is a medical device. Please read all instructions and safety guidelines carefully before use.